I know, Harbour Freight is evil, but they had the exact tool I needed to remove the countersunk screws that hold the brake drum onto the axle. None of the local parts shops had anything in the size I needed.
For all of $10 they are a bargain for a set of 4. This is the 2nd largest.
The item number is 96329 and are available at: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96329
I'm sure the fancy name brand guys (Snap On, MAC) have the same thing for like $30.
Found the right tool for drake drum removal!
2 posts
• Page 1 of 1
Found the right tool for drake drum removal!
by pfarber » Tue May 20, 2008 3:22 pm
- Attachments
-
- Here is a tool I found for the removal of the countersunk screws on the brake drum. They fit 1/2 sockets and fit the screw PERFECTLY. Just be careful to keep the socket parallel to the slot or the thing pops right out.
- brakescrew.jpg (16.17 KiB) Viewed 5598 times
-
pfarber - Motor Sergeant
- Posts: 2839
- Joined: Wed Oct 10, 2007 2:45 am
- Location: The Internet
2 posts
• Page 1 of 1