NOS valve cover
Posted: Thu May 10, 2012 12:36 pm
This valve cover was on an ebay auction, says NOS:
So I emailed and then called the place selling them. Talked to Steve and it seems that they are a huge surplus site as he spoke of thousands of parts and seems to have a good idea what I was talking about.
But the valve cover PAINT was my main concern. Below are the questions I asked and the paraphrased answer:
Were they in GMC boxes: They were in boxes that deteriorated. No legible markings.
Were there any numbers or decals/stickers on the valve covers?: No. Solid color nothing on them.
He then stated that there used be thousands of them.... MANY IN PRIMER(!).
I then said that these could be valve covers off the M135 302 engine. He didn't seem to know that the 302 is an GMC270 with a few mods.
I have doubts that these are GMC 270/CCKW valve covers. Nothing points at them having original paint. The biggest red flag was that some were in primer.
He also states that the PCV elbow was on some, but not others. Thats another red flag. Just because a part is in the SNL doesn't mean that you could order it, and a valve cover surely would be sent with the proper parts to hook up the PCV system (otherwise you have a gaping hole in your vacuum system).
I'm not going to spend $50 and not have some sort of provenance attached to this paint color.
So I emailed and then called the place selling them. Talked to Steve and it seems that they are a huge surplus site as he spoke of thousands of parts and seems to have a good idea what I was talking about.
But the valve cover PAINT was my main concern. Below are the questions I asked and the paraphrased answer:
Were they in GMC boxes: They were in boxes that deteriorated. No legible markings.
Were there any numbers or decals/stickers on the valve covers?: No. Solid color nothing on them.
He then stated that there used be thousands of them.... MANY IN PRIMER(!).
I then said that these could be valve covers off the M135 302 engine. He didn't seem to know that the 302 is an GMC270 with a few mods.
I have doubts that these are GMC 270/CCKW valve covers. Nothing points at them having original paint. The biggest red flag was that some were in primer.
He also states that the PCV elbow was on some, but not others. Thats another red flag. Just because a part is in the SNL doesn't mean that you could order it, and a valve cover surely would be sent with the proper parts to hook up the PCV system (otherwise you have a gaping hole in your vacuum system).
I'm not going to spend $50 and not have some sort of provenance attached to this paint color.