Page 1 of 1

Silly MV owners

PostPosted: Fri Oct 21, 2011 6:03 am
by pfarber
This is TO FUNNY.

Kat's 11619 600 Watt 3/4" NPT Frost Plug Heater
List Price: $36.89
Price: $26.77 & this item ships for FREE with Super Saver Shipping.

bh.JPG
bh.JPG (11.83 KiB) Viewed 3246 times


http://www.amazon.com/gp/product/B000I8TPNW

Or:

M35A2 M54 LDS MULTIFUEL MOTOR BLOCK HEATER
YOU ARE BIDDING ON ONE NEW MULTIFUEL BLOCK HEATER IT IS 600 WATT FITS ALL LDT LDS AND LD MOTORS IN 2.5 AND 5 TON VEHICLES IT IS 3/4 PIPE THREAD

SHIPPING WILL BE SAME DAY OR NEXT DAY

bh.JPG


Bid history:
8 bids
Current bid: US $74.00
Shipping: $5.50 Expedited Shipping

Kudos for the seller making 100% profit. Yes, THEY ARE THE EXACT SAME PART.

8 people on ebay are going to get ripped of. hahahahahahahahahahahaha

Re: Silly MV owners

PostPosted: Fri Oct 21, 2011 6:04 am
by pfarber
And yes, I got mine off amazon.

$80 for a $30 part. hahahahaha

This made my day.

Re: Silly MV owners

PostPosted: Wed Mar 14, 2012 5:31 am
by jhavn
Just a idea

I have a M151A1 and on this page on the internet you can see Civilian Part Cross-Reference to M151A1 http://g838.org/wiki/doku.php?id=cross_reference_list

Like your post it will be nice to get the parts to a nice price
Jhavn

Re: Silly MV owners

PostPosted: Wed Mar 14, 2012 11:11 am
by pfarber
You have to be careful, some versions of the water pumps used in the LDT/LDS engines are made from different castings. The water pump in my 66 M35a2 would not fit the 600 watt heater. The element is about 3 inches long and it was hitting part of the casting (not the impeller).

So I had to get the shorter 400watt version and it fit fine.

I am not the only person to have this issue... so if you want to gamble get the 600 watt unit... but if it hits the pump casting send it back... there is no way to modify the element without breaking the seals on the tips that protrude through the fitting.